H3C GB0-372-ENU

In recent years, more and more people choose to take H3C GB0-372-ENU certification exam. Because the exam can help you get the H3C certificate which is an important basis for measuring your IT skills. With the H3C certificate, you can get a better life.

At ITexamGuide, we will offer you the most accurate and latest GB0-372-ENU exam materials. When you are prepared for GB0-372-ENU exam, these exam questions and answers on ITexamGuide.com is absolutely your best assistant. With our H3C study materials, you will be able to pass H3C GB0-372-ENU exam on your first attempt. Also you don't need to spend lots of time on studying other reference books, and you just need to take 20-30 hours to grasp our exam materials well.

ITexamGuide is a website that includes many IT exam materials. Our PDF version & Software version exam questions and answers that are written by experienced IT experts are good in quality and reasonable price, and many customers have been well received. The hit rate is up to 99.9%. Guarantee you pass your GB0-372-ENU exam. And the test engine on ITexamGuide.com will give you simulate the real exam environment. Then, you can deal with the GB0-372-ENU exam with ease.

In our sincerity, for each client with high-quality treatment services every transaction. After you purchase GB0-372-ENU exam materials, we will provide you with one year free update. In order to make the candidates satisfied, our IT experts work hard to get the latest exam materials. We also will check the updates at any time every day. If the materials updated, we will automatically send the latest to your mailbox.

Before you buy, you can try our free demo and download free samples for GB0-372-ENU exam. If you are satisfied, then you can go ahead and purchase the full GB0-372-ENU exam questions and answers.

100% money back guarantee - if you fail your exam, we will give you full refund. You just need to send the scanning copy of your examination report card to us. After confirming, we will quickly refund your money.

And just two steps to complete your order. Then we will send your products to your valid mailbox. After receiving it, you can download the attachment and use the materials.

H3CSE-RS-SW Sample Questions:

1. The figure shows the stable topology after STP calculation convergence. Which of the following statements is correct? (Multiple choice)

A) This BPDU is a configuration BPDU, and the destination address is 01-80-C2-00-00-0
B) SWA is the root bridge in the network
C) The sending period of this BPDU is HelloTime
D) The aging time for the port to save the BPDU is MaxAge

2. What does SDN in a narrow sense include? (Multiple choice)

A) VXLAN
B) Southbound interfaces such as OpenFlow and Netconf
C) RestFul API and other northbound interfaces
D) Strong control and weak control

3. In the network shown in the figure, the PIMSM protocol is running between RT1, RT2 and RT3, the RP is 1.1.1.1, and there is a multicast source connected to the downstream receiver RT3. Check the RT3 unicast routing table as follows:
[RT3] display ip routing-table Routing Tables: Public Destinations: 10 Routes: 10 Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/32 OSPF 10 1562 192.168.2.1 s0/2/1
127.0.0.0/8 Direct 00 127.0.0.1 In Loop 0
127.0.0.1/32 Direct 00 127.0.0.1 In Loop 0
192.168.0.0/30 Direct 00 192.168.0.2 S0/2/0
192.168.0.1/32 Direct 00 192.168.0.1 S0/2/0
192.168.0.2/32 Direct 00 127.0.0.1 In Loop 0
192.168.1.0/30 OSPF 10 3 124 192.168.2.1 S0/2/1
192.168.2.0/30 Direct 00 192.168.2.2 so/2/1
192.168.2.1/32 Direct 00 192.168.2.1 so/2/1
192.168.2.2/32 Direct 00 127.0.0.1 In Loop 0
Then, when the RP sends a registration stop message, which of the following routers have (S, G) entries? (Multiple choice)

A) RT2
B) RT3
C) RT1

4. The router IGMP Snooping function must be enabled in which of the following view?

A) IGMP view
B) User View
C) System global view
D) VLAN view

5. In the network shown in the figure, the PIMSM protocol is running between RT1, RT2 and RT3, the RP is 1.1.1.1, there is a receiver connected to RT3, and IGMP is enabled on the corresponding interface.
The unicast routing table in RT3 is as follows:

[RT3] display ip routing-table Routing Tables: Public Destinations: 10 Routes: 10 Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/32 OSPF 10 1562 192.168.0.1 S0/2/0
127.0.0.0/8 Direct 00 127.0.0.1 In Loop 0
127.0.0.1/32 Direct 00 127.0.0.1 In Loop 0
192.168.0.0/30 Direct 00 192.168.0.2 S0/2/0
192.168.0.1/32 Direct 00 192.168.0.1 S0/2/0
192.168.0.2/32 Direct 00127.0.0.1 In Loop 0
192.168.1.0/30 OSPF 10 3 124 192.168.2.1 s0/2/1
192.168.2.0/30 Direct 00 192.168.2.2 so/2/1
192.168.2.1/32 Direct 00 192.168.2.1 so/2/1
192.168.2.2/32 Direct 00 127.0.0.1 In Loop 0
Then, when the receiver sends a group join request, which of the following routers have (*, G) entries?
(Multiple choice)

A) RT2
B) RT3
C) RT1

Solutions: